Welcome to Catmint Manufacturers and Suppliers of Classic Car Parts

Privacy Notice :: About Us :: FAQ's :: Payment Options :: Custom Projects :: Updates and New Products :: Contact us :: JOAC

Information

More Information

Manufacturers

Home :: Mini - Competition Accessories

Mini - Competition Accessories

Period reproduction parts that were used by competition cars and some more upto date bits as well

Displaying 1 to 20 (of 45 products)

1 2 3 [Next >>]

Product Image	Item Name-	Price
	100 degree bend, 1/2 copper pipe CAT1068 1/2 inch copper pipe with a 100 degree bend (approximate angle)- ideal for heater pipes when a positive position or bend is required Dimensions are...	£4.50 Add:
	110 degree bend, 1/2 copper pipe CAT1069 1/2 inch copper pipe with a 110 degree bend (approximate angle)- ideal for heater pipes when a positive position or bend is required Dimensions are...	£4.50 Add:
	180 degree bend, 1/2 copper pipe CAT1071 1/2 inch copper pipe with a 180 degree bend (approximate angle)- ideal for heater pipes when a positive position or bend is required. Only one end is...	£6.50 Add:
	20 degree bend, 1/2 copper pipe CAT1067 1/2 inch copper pipe with a 20 degree bend (approximate angle)- ideal for heater pipes when a positive position or bend is required Dimensions are...	£4.50 Add:
	45 degree bend, 1/2 copper pipe CAT1070 1/2 inch copper pipe with a 45 degree bend (approximate angle)- ideal for heater pipes when a positive position or bend is required Dimensions are...	£4.50 Add:
	576 Bonnet mount spacers CAT1025 This pair of spacers allow the fitment of rear mount 576 spot lights to the front curve of the bonnet.Machined from billet aluminum and powder...	£100.00 Add:
	576 Center mount bracket CAT1026 For fitting a single rear mount 576 spot light to the slam panel. Made from 2mm steel so is ample strong. The gap between the legs allows access to...	£23.00 Add:
	90 degree bend, 1/2 copper pipe CAT1054 1/2 inch copper pipe with a 90 degree bend - ideal for direct routing into the heater return on the bottom hose if not heater is fitted	£4.50 Add:
	Air horn compressor mount plate CAT1028 Bracket for mounting the air horn compressor on the inside of the slam panel where the horn normally lives. Made from 2mm steel and finished in zinc...	£12.00 Add:
	Auxiliary gauge panel Panel for tacho and one guage, designed to sit under the top rail, with support to the parcel shelf. Crackle finsh	£26.00 ... more info
	Auxiliary gauge panel 52mm dual Panel for two 52mm guages. Crackle finsh	£15.00 Add:
	Auxiliary gauge panel 52mm single Panel for one 52mm guage. Crackle finsh	£14.00 Add:
	Auxiliary switch panel - large Large switch panel, ideal for starter or battery cut off switch. Crackle finsh	£14.00 Add:
	Battery Box Skid Plate CAT1029 For the serious rally driver. 5mm thick alloy plate of similar specification to the traditional dural to help protect the battery box from damage.	£55.00 Add:
	Box Dash Set, Works Style CAT1014 Classic 60s 'Works' Mini Cooper S dashboard, as seen in many Competition Minis of the time. The pair of dash panels are made of alloy and finished in...	£83.00 ... more info
	Box Dash Short Set, Works Style CAT1014S Shorter version of CAT1014 for cars fitted with a front roll cage Classic 60s 'Works' Mini Cooper S dashboard, as seen in many Competition Minis of...	£83.00 ... more info
	Bulkhead Speedo Hole Blanking Plate CAT1056 To cover the engine side of the bulkhead. One hole picks up the top left speedo cowl mount screw, the remaining holes need to be drilled for self...	£22.00 Add:
	Bumper Support brackets CAT1034 Additional support for the quick release brackets CAJJ3318. These fit on the inside of the bumper and run down to the front valence. Due to the...	£8.00 Add:
	Driver Bucket Seat and Frame (untrimmed) CAT1036 Our version of the classic works style bucket seat. The fibre glass bucket is professionally made with the gel coat facing out over. The frame is...	£425.00 ... more info
	Early Works/ST Style Flat Dash Set CAT1013 Replica 60s ST 'Works style' dashboard as used in Competition Minis. The pair of dash panels are made of alloy and finished in crackle black powder...	£54.00 ... more info